Description
Precision block can be used for almost any job. These units are smooth-faced, straight-edged CMU. They are the common or "basic" block type. Its texture is the "as molded" finish produced by vibration during manufacture. Precision units offer the most utility and versatility as reflected in the wide range of available units.
Sizes of precision units are expressed in terms of nominal dimensions and compensate for a standard 3/8 inch mortar joint. That is, an 8 x 8 x 16 is actually 7 5/8 x 7 5/8 x 15 5/8 inches, with a permissible variation in overall dimensions (width, height, length) of ± 1/8 inch.
Standards
All precision units manufactured by Elliott Block are hollow or solid load bearing CMU in accordance with:
• ASTM C-90, Grade N or UBC Standard No. 24-4, Grade N for hollow.
• ASTM C-145, Grade N (also UBC 24-4) for solid.
4" Wide
| 
| 
| 
|
6" Wide
4" Tall
8" Tall
8" Wide
4" Tall
8" Tall
12" Wide
Wedge Lock System
| 6 x 8 x 16 WedgeLock is available in tan and gray normal weight. | 
| 6 x 8 x 16 is also available for use in stucco walls |
| 6 x 8 x 16 WedgeLock split face is available in tan and gray medium weight. | 
| 8 x 8 x 16 WedgeLock available in tan and gray normal weight. |
Caps
| 
| 
|
Pilasters
